Home › Services › Concrete Repair & Crack Stitching

Concrete Repair & Crack Stitching

The fastest way to fail a resin floor is to install it over poor concrete. We rebuild substrates so an epoxy or PU floor can perform for its full life.

System overview

What you get

The fastest way to fail a resin floor is to install it over poor concrete. Our concrete repair service rebuilds substrates so an epoxy or PU floor can perform for its full life — crack stitching, joint reinstatement, screed bedding and repair mortars to BS EN 1504.

Static crack stitching with stainless staples + epoxy injection
Saw-cut control joint reinstatement with PU caulk
Cementitious repair mortars (R3 / R4 grade per BS EN 1504-3)
Self-levelling latex screed bedding for new resin overlays

Request a Quote →

When concrete needs help

Common Gulf substrate problems we fix.

⚠️

Random Cracking

Differential settlement, drying shrinkage. Stitched, injected and overcoated.

🚪

Joint Spalling

Lifted joint edges from forklift impact. Cut back, repaired with PU caulk or rapid-setting mortar.

💧

Rising Damp

Underground water table failure. Vapour-barrier primer + breathable system spec.

🌊

Slab Curl & Wave

Diamond grinding to plane, then self-levelling latex bedding.

🔥

Burnt-In Oil

Mechanical removal + degreasing, sealed with isolation primer before resin.

🪨

Old Tile / Topping

Mechanical strip-out, primer, then resurface with new screed and resin.

FAQ

Common questions

Do you do epoxy injection of structural cracks?

Yes — low-viscosity epoxy injection through bonded ports, on cracks above 0.3 mm. We follow ACI 224 and BS EN 1504-5. Stainless staples added across active cracks for crack-bridging.

Can you eliminate rising damp before installing the floor?

We can manage it — solvent-free epoxy vapour-barrier primer at 0.4 kg/m² blocks RH up to 95%. For higher RH, we strongly recommend addressing drainage at the building level first.

How long after concrete repair before resin can go down?

For cementitious repairs: 7 days minimum drying / curing. Epoxy injection: 24 hours. Latex self-leveller: 24–48 hours. We always moisture-test before starting the resin.

Get a fixed quote in 1 to 2 working days.

Free site visit anywhere in Qatar or the UAE. Tell us a postcode and a rough area — we'll be on-site this week.

Request Quote → 📞 UAE +971 50 234 1445 📞 Qatar +974 4472 6271